Huawei AX3
Jump to navigation
Jump to search
Contents
Device info
Reconfiguring your router
- Open your browser (Firefox, Chrome, Edge, Safari, etc.) and browse to the following address: https://192.168.3.1/
- Log in with the router password printed on the included datasheet. If your router has not been pre-configured you will need to complete the setup wizard.
Setup Wizard
If your router has been pre-configured you will not need to follow these steps.
To start the connection wizard, accept the terms and conditions.
- Check that the router's WAN port is connected to the ONT. If your fibre line has not been activated yet, and you receive the following error, click `Connect later`
- For **Openserve** or **Vodacom** connections, select `PPPoE`. Enter the PPPoE username and password from the datasheet included with your router. Click `Next`. For all other fibre connections, select `DHCP` and click `Next`.
- If any of your devices aren't compatible with WiFi6 6, enable the backup WIFi 5 network. Click `Next`. Enter a name for your WiFi network, and create a WiFi password and a strong router login password. The router login password is only for accessing this configuration page, but you may need it in future, so take note of it.
- You have now completed the setup wizard.
For Openserve or Vodacom Fibre
- Set the connection type to PPPoE.
- Enter your fibre username and password.
- Click Save or Connect.
For all other networks
- Set the connection type to Dynamic IP.
- Click Save or Connect.
- When the connection is established, browse to the following address: [1]
- Enter your fibre username and click Authenticate.
